bits
Configuration parameter which defines the serial interface being used. The bits field consists of three parts:| Data bit - 7 or 8
|
| Parity - None, Odd or Even
|
| Stop Bit - 1 or 2
|
For Toshiba PLCs, the bits field must be set at 8-even-2. For Engels, the data bit should be 7 with even parity. For RKC F900 sources, the bits field should be set at 8-None-1. For MACO 8000 sources, the bits field should be set at 8-None-2. Unilog 9000B sources must be set at 8 data bits. Stop bits and parity can be selected in the control unit.