changing rio settings
The RIO tab is only available after an RIO has been defined in the com ports tab.
To change the RIO settings:
| · | Click on the RIO tab located in the middle of the screen.
|
This tab allows the configuration of the Remote I/O unit. In order for a machine to be able to collect data from the RIO the check box next to the machine number must be selected. Once selected, the machine will retrieve all process variables and profile data including cycle time from the RIO unit. The other boxes allow the user to specify whether 1 RIO is connected to all machines or each machine has its own RIO, if the analog card in the rio is isolated, or whether the shuttle type boot set should be downloaded to the RIO.