decimals
Specifies where to put the decimal point in a sampled value prior to applying a scale factor and bias. For example, when the implied decimal position = 3, the inputs 0.4102, 0.410 and 0.41 are interpreted as 0.410. Valid decimal positions can be from 0 to 4.For Netstal source types, the decimal value for the desired Parameter Number and Convert Index must be obtained from Netstal's PLC Interface Table.
Netstal PLC Interface Table
S19 4 0 1.00 1
S11 5 0 1.00 1
T11 6 3 1.00 1
T02 7 3 1.00 1
T34 8 3 1.00 1
S00 9 0 1.00 1
T21 10 3 1.00 1
TH11 11 2 1.00 0
TH12 12 2 1.00 0
TH13 13 2 1.00 0
TH15 14 2 1.00 0
TH16 15 2 1.00 0
TH17 16 2 1.00 0
TH25 17 2 1.00 0
TH26 18 2 1.00 0
P21 19 0 1.00 0
P22 20 0 1.00 0
P23 21 0 1.00 0
P24 22 0 1.00 0
N21 23 2 1.00 0
N22 24 2 1.00 0
N23 25 2 1.00 0
N24 26 2 1.00 0
V01 27 2 1.00 0
V02 28 2 1.00 0
V03 29 2 1.00 0
V04 30 2 1.00 0
V05 31 2 1.00 0
S01 32 2 1.00 1
S02 33 2 1.00 1
S03 34 2 1.00 1
S04 35 2 1.00 1
S05 36 2 1.00 1
P12 37 3 10.00 0
P13 38 3 10.00 0
P14 39 3 10.00 0
P15 40 3 10.00 0
T12 41 3 1.00 1
T13 42 3 1.00 1
T14 43 3 1.00 1
T15 44 3 1.00 1
T39 45 3 1.00 1